Grizzly T25920 Owner's Manual page 31

H5954—Robert Sorby Stebcentre MT#2, 1
Razor sharp teeth bite into the workpiece for
secure operation and the spring loaded center
point controls the amount of drive or slip. This pat-
ented feature helps avoid the problem of 'dig-in'.
Production turners can also load and unload their
work while the lathe is still running!
Figure 45. Model H5954 MT#2 Stebcentre.
T10117—Big Mouth Dust Hood with Stand
Capture dust from any machine operation with
this Big Mouth Dust Hood. Simply attach a 4" dust
collection hose and adjust the hood right where
you need it. The free-standing base eliminates
complicated machine set-ups and the tilting 16
x 12 ⁄ " hood adjusts from 23" to 43" high. Every
7
8
shop needs one of these!
Figure 46. Dust collector with hood.
order online at
Model T25920/T25926 (Mfd. Since 08/14)
⁄ "
1
4
⁄ "
3
8
www.grizzly.com
T10501—9 Piece Wood Lathe Center Kit
This all-in-one set features a variety of
interchangeable lathe centers for every spindle
turning application. Includes: MT#1 and MT#2
live centers, 3 spur centers, 3 multi-spur centers,
mounting adapter, wrenches and fitted case. Fits
lathes with 1" x 8 TPI RH spindles.
Figure 47. Lathe center kit with fitted case.
H0507—20" Swan Neck Hollowing Tool
H0508—24" Swan Neck Hollowing Tool
An excellent choice for blind turning or undercut-
ting where reach is restricted. H0507 is designed
for end grain use while H0508 (with a more sub-
stantial steel cross section) is designed for both
end grain and side grain (bowl) use.
Figure 48. Swan neck hollowing tools.
1-800-523-4777
or call
-29-