Product View - Philips HeartStart M5066A Owner's Manual

front view
I
A
Pads Cartridge Handle.
Pull the handle to turn on the
HeartStart and remove the
cartridge's hard cover.
B
Ready Light.
This green light
tells you the readiness of the
HeartStart.
Blinking: standby mode
(ready for use)
Solid: in use
Off: needs attention
(HeartStart
"chirps" and
i-button flashes)
C
On/Off Button.
Press this
green button to turn on the
HeartStart. To turn off the
HeartStart, press the green button
again and hold it down for one (1)
second.
A
A
top
F
G
H
The HeartStart Defibrillator M5066A
D
Information Button.
blue "i-button"
has information you can access by
pressing it. It also flashes at the
beginning of a patient care pause
when CPR coaching is enabled.
E
Caution Light.
light flashes during rhythm
analysis and is on when a shock is
advised, as a reminder that no one
should be touching the patient.
F
Shock Button.
instructed by the HeartStart to
deliver a shock, press this flashing
orange button
G
Infrared (IR)
Communications Port.
special lens, or "eye," is used to
transfer HeartStart data directly to
or from a computer.
back view
B B
L
L
C
D
E
This
flashes when it
This triangular
When
.
This
top
K
H
Speaker.
When the device is
being used, its voice instructions
come from this speaker.
I
Beeper.
The HeartStart
"chirps" through this beeper to
alert you when it needs attention.
J
SMART Pads Cartridge.
disposable cartridge contains self-
adhesive pads with attached cable.
Shown with adult pads cartridge.
K
SMART Pads Cartridge
Latch.
Slide the latch to the right
to release the pads cartridge for
replacement.
L
Battery.
The non-
rechargeable battery is inserted in
a recess on the back of the
HeartStart.
K
This