Philips HeartStart M5066A Owner's Manual page 63

rated maximum output
power of transmitter (W)
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d
in meters (m) can be determined using the equation applicable to the frequency of the transmitter, where P is
the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1. At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2. The ISM (industrial, scientific and medial) bands between 150 kHz and 80 MHz are 6,765 MHz to 6,795 MHz;
13,553 MHz to 13,567 MHz; 26,957 MHz to 27,283 MHz; and 40,66 MHz to 40,70 MHz.
NOTE 3. An additional factor of 10/3 is used in calculating the recommended separation distance for transmitters in the
ISM frequency bands between 150 kHz and 80 MHz and in the frequency range 80 MHz to 2.5 GHz to decrease the
likelihood that mobile/portable communications equipment could cause interference if it is inadvertently brought into
patient areas.
NOTE 4. These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
Recommended separation distances between portable and mobile RF
communications equipment and the HeartStart
The HeartStart is intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled. The customer or the user of the
HeartStart can help prevent electromagnetic interference by maintaining a
minimum distance between portable and mobile RF communications equipment
(transmitters) and the HeartStart as recommended below, according to the
maximum output power of the communications equipment.
separation distance according to frequency of transmitter (m)
80 MHz to
800 MHz
d = 0.6√ P
0.06
0.19
0.6
1.9
6.0
H-3
800 MHz to
2.5 GHz
d = 1.15√ P
0.115
0.36
1.15
3.64
11.5
H