Loading Cutlery And Dishes - Electrolux ESF 2200 DW User Manual

8 electrolux
3. Remove the spilled rinse aid with an ab-
sorbent cloth to prevent too much foam
during the programme.
4. Put the cap on again and turn it clock-
wise until it locks. Make sure that the
signs on the cap and on the dispenser
are aligned.

LOADING CUTLERY AND DISHES

HINTS AND TIPS
• Do not put in the appliance items that
can absorb water (sponges, household
cloths).
• Remove the remaining food from the
items.
• Make soft the remaining burned food on
the items.
• Put hollow items (cups, glasses and
pans) with the opening down.
• Make sure that water does not collect in
containers or in bowls.
• Make sure that cutlery and dishes do not
bond together.
• Make sure that the glasses do not touch
other glasses.
• Put small items in the cutlery basket.
• Mix the spoons with other cutlery to pre-
vent them to bond together.
• When you put the items in the basket,
make sure that the water can touch all
surfaces.
ADJUST THE RINSE AID DOSAGE
G
Factory set: position 4.
You can set the rinse aid dosage between
position 1 (lowest dosage) and position 4
(highest dosage).
Turn the rinse aid selector (H) to increase or
decrease the dosage.
• Make sure that light items cannot move.
• Water droplets can collect on plastic
LOADING THE BASKET
The rows of prongs in the basket can be
lowered to load pots, pans and bowls.
items and non-stick pans.
H