Faqs - Huawei eSpace IAD208E(M) Quick Start Manual

eSpace IAD208E(M) Integrated Access Device
Quick Start
1. Q: How do I log in to the IAD management system?
A: You can log in to the IAD management system in the following modes:
−
Web mode: Open Internet Explorer, enter http://IP address of the IAD
(192.168.100.1 by default) in the address box, and enter the user name root and
password (admin by default).
−
Telnet mode: Enter telnet IP address of the IAD (192.168.100.1 by default) in
the Run dialog box, and enter the user name root and password (admin by
default).
−
Local serial port mode: For details, see the product document.
2. Q: What are the default IP address, user name, and password used to log in to the
IAD?
A: The default IP address is 192.168.100.1.. The default user name is root, and the
default password is admin.
3. Q: How do I log in to the IAD if I forget the password?
A: Log in to the IAD using the user name restore-config and password
restore-config to restore the default settings of the device and restart the device.
After the device restart, use the default IP address 192.168.100.1, user name root,
and password admin to log in.
4. Q: How do I restore the IAD to factory settings?
A: You can restore the IAD to factory settings in either of the following ways:
−
Log in to the web management system, and choose System Tool >
Maintenance > Restore Default. On the page that is displayed, select Factory
setting, and click OK. Restart the IAD for the settings to take effect.
−
Log in to the CLI, and run the enable and configure terminal commands in
sequence to enter the global configuration mode. Then run the restore
vendor-config command. Restart the IAD for the settings to take effect.
5. Q: How to restart the IAD?
A: You can restart the IAD in either of the following ways:
−
Log in to the web management system, and choose System Tool >
Maintenance > Restart Device. On the page that is displayed, click Restart
Device.
−
Log in to the CLI, and run the enable and configure terminal commands in
sequence to enter the global configuration mode. Then run the reboot
command.
Issue 04 (2012-06-11) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

5 FAQs

5
FAQs
30