Establishing The Web Configuration Environment - Huawei eSpace IAD208E(M) Quick Start Manual

eSpace IAD208E(M) Integrated Access Device
Quick Start

Establishing the Web Configuration Environment

The IAD hardware connections are set up and the IAD is powered on.
Use the network cable to connect the network port of the PC to any network port of the
IAD208E(M). If the PC network port does not support self-adaptation, you need to use
the crossover cable. Set IP addresses of the PC and IAD (the default IP address of the
IAD is 192.168.100.1) in the same network segment to ensure that the PC can ping the
IAD successfully.
Logging In to the Web Management System
1. Start the Microsoft Internet Explorer. Enter the IP address of the IAD208E(M) (the
default IP address is 192.168.100.1) in the address box. The login page is displayed,
shown as follows.
If you changed the IP address of the IAD, you can do as follows to obtain the IP address.

Dial *127 on the phone connected to the IAD, and then the voice announcement plays
the IP address.

Log in to the IAD through the serial port and run the display ipaddress command in the
normal user mode to view the IP address of the device. How to log in to the IAD
through the serial port, see Logging In Through Local Serial Port.
2. Set the system language to simplified Chinese or English as required. Enter the user
name and password and click Login. By default, the user name is root, the
password is admin and the protocol is SIP. Take the SIP version as an example,
and the page is displayed as follows.
Issue 04 (2012-06-11) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Manual Configuration (Web)
9