Iad (Sip) Accessing The Ngn/Ip Pbx Network; Data Planning - Huawei eSpace IAD208E(M) Quick Start Manual

eSpace IAD208E(M) Integrated Access Device
Quick Start
3. After you log in to the system, you can click Change Password at the upper right
corner of the page to set a new password. After the password is set, record related
data.
The web management system provides inner help information on the Web page. Configure
the data according to the help information. And this document does not introduce the help
information repeatedly.

4.2 IAD (SIP) Accessing the NGN/IP PBX Network

Users of the IAD208E(M) register with the SoftSwitch to implement the voice service.
After configuring the data on the SoftSwitch, configure the data on the IAD208E(M).
Then the IAD208E(M) can register with the SIP server to implement the voice service.

Data Planning

Obtain the following data from the administrator before configuring the data.
Item
IP address of the IAD208E(M)
IP address of the SIP server
SIP user ID
SIP user password
Procedure
Step 1
View the current protocol mode. Choose Advanced Configuration > Protocol Mode
to display the protocol mode setting page.
Issue 04 (2012-06-11)
Example
IP address: 192.169.1.62
Subnet mask: 255.255.255.0
Gateway IP address: 192.169.1.1
IP address: 192.169.1.40
8900
1234
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Manual Configuration (Web)
10