Samsung KS9800 E-Manual page 58

● Auto Motion Plus
" When LED Clear Motion
Smart LED
●
" Controls the brightness of individual areas on the screen to maximise contrast automatically.
" This function is not available on certain models in specific geographical areas.
● Film Mode
Try Now
" This function is only available when the input signal is TV, AV, Component (480i, 1080i), or HDMI (1080i).
HDMI UHD Color
●
" If you set the HDMI connector to On, the TV turns off and then on automatically.
"
Each HDMI connector can be individually optimised for
external device that supports only UHD 24 or 30 Hz frequency or any FHD frequency, the
function may not be available. In this case, set
" The HDMI connector with
while the HDMI connector with
input signals. For more information, refer to "Supported Resolutions for each of UHD Input Signals".
HDMI Black Level
●
" This function is only available when the input signal, connected to the TV via an HDMI connector, is set to
RGB444.
● Dynamic Contrast
● Colour Tone
Try Now
" Cool and Standard
" Colour Tone is only available when the TV is connected to a computer via an HDMI-to-DVI cable.
● White Balance
Try Now
● Gamma
Try Now
RGB Only Mode
●
Try Now
Colour Space
●
Try Now
● Reset Picture
Try Now
Try Now
is set to On, the screen appears darker than when it is Off.
Try Now
HDMI UHD Color
HDMI UHD Color
Try Now
Try Now
are only available when
HDMI UHD
HDMI UHD Color to Off.
set to Off supports up to UHD 50P/60P 4:2:0 input signals,
set to On supports up to UHD 50P/60P 4:4:4 and 4:2:2
Picture Mode is set to Dynamic.
Color. When you connect the TV to the
HDMI UHD Color