Carpet Cleaning - Pyle PUCVWD43 Instructions Manual

7. CARPET CLEANING

7.1 SET-UP
Water, mixed with a suitable carpet shampoo solution, is pumped deep into the
fibres of the carpet via the shampoo application nozzle. The dirty liquid is then
sucked back into the waste tank along with the dirt and grime dislodged by the
cleaning solution. Water can be pumped up to 2 meters above the machine so
that stairs may also be shampooed.
WARNING! Ensure you read, understand and apply Section 1 'Safety
Instructions'.
Reminder: DO NOT vacuum hazardous substances.
7.1.1 Ensure the machine is unplugged from the power supply.
7.1.2 Fit the foam filter.
7.1.3 Reposition the head onto the tank body and clip in place.
7.1.4 Ensure that the shampoo solution has been mixed with the
recommended proportion of water and pour it into the shampoo tank. Insert the
shampoo tank connecting tube and filter into the tank and push the cap onto
the tank filler neck to avoid any shampoo splashing out whilst working.
7.1.5 Plug the nozzle on the other end of the shampoo tank connecting tube
into the shampoo inlet hole on the rear of the motor housing.
www.pyleaudio.com