Battery Charging; Scheduling; Cleaning Modes - Pyle PUCRC750 Instruction Manual

Product Operation

Battery Charging

1. Place on charging home base.
Put charging home base against the wall and remove obstacles about 1 meter at two
sides and about 2 meters forward like in picture a.
2. Plug into an outlet like in picture b.
3. Press the self-charging button to make the robot go back to the home base for
charging like in picture c.
Note:
a. During charging, the indicator light on the main
body turns yellow from strong to weak.
b. After charging is finished, the indicator light
will turn green.
c. Low power in standby mode, the indicator light
will turn red.
d. Low power in working mode, the indicator light
will turn red.
Ways to effectively extend battery life:
a. For initial use charge the robot for 12 hours.
b. Recharge battery as soon as it's drained.
c. The robot will automatically return to charging home base when cleaning is done or
battery is low.
d. Take out battery and store in safe keeping if robot will not be used for a long time.
e. If the robot is not used for 3 months, please charge it for 12 hours.
10
Product Operation

Scheduling

You can schedule to let the robot start cleaning from a certain time with the remote control
as followed:
1. Make sure the robot is in standby/charging mode, long press the "Plan" button on the
remote control. And the left "00" of "00:00" will flash from hour to minute setting.
2. Press button to increase and decrease hour.
3. Press button to exchange from hour to minute.
4. Press button to increase and decrease minute.
5. Press the ON/OFF button to save the schedule.
6. To cancel scheduling, set the number on display panel to "00:00" in scheduling mode
Note: When scheduling, the figures displayed on the screen is the delayed time. For
example, 02:30 on the screen means the robot will start working 2 and half hours later from
now on. (The left "00" means hour while the right one means minute.) Once the time is
scheduled, the robot will always work according to the setting every day.
Cleaning mode
1. Auto cleaning
In auto mode, the robot keeps walking straight, and will automatically
make a turn when meeting obstacles to cover some irregular environment
and corners. (Picture 1)
2. Edge cleaning
In edge cleaning, the robot walks along the obstacles and walls, ideal for
corner and edge cleaning. (Picture 2)
3. "Lune" line cleaning
In this mode, the robot walks in a "lune" line, which avoids duplication of
cleaning. Fast and effective, ideal for large regular rooms cleaning.
(Picture 3)
4. "V" line cleaning
In this mode, the robot walks in a "V" line, which avoids duplication of
cleaning, also ideal for large regular rooms cleaning. (Picture 4)
Note: Press the "mode" button to exchange
"MODE 1": Auto cleaning, "MODE 2": Spot cleaning
"MODE 3": Lune line cleaning, "MODE 4": V line cleaning
11