Troubleshooting - Pyle PUCVWD43 Instructions Manual

Wet/dry shop vac, multi-surface vacuum & carpet cleaner
Table of Contents

Advertisement

9.TROUBLESHOOTING

Cleaner will not operate.
Dust comes from the motor
cover.
Reduced efficiency and
increased
motor speed/vibration.
No solution spraying out.
10. CONSUMABLES
Paper dust bag (Must be used for dry vacuuming)
Foam Filter
IMPORTANT! IF THE MACHINE IS USED WITHOUT A PAPER DUST BAG
FITTED THE MOTOR WILL BURN OUT EVENTUALLY AND YOUR
GUARANTEE WILL BE INVALIDATED. ALWAYS KEEP A SPARE PAPER
DUST BAG HANDY.
NOTE: It is our policy to continually improve products and as such we reserve
the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
No power supply.
Faulty power cable, switch or
motor.
Container full of liquid.
Bag missing or damaged.
Filter clogged.
Nozzle, hose or container inlet
blocked.
Switch on wrong position.
Shampoo tank is empty.
Incorrectly fitted trigger or pipes.
www.pyleaudio.com
Check supply.
Check and repair or
replace faulty item.
Empty container.
Fit or replace dust bag.
Clean or replace bag.
Check nozzle, hose and
container inlet for blockage.
Turn switch to the required
position.
Add more shampoo.
Check fittings and
connections. Ensure there
are no
kinks in tubes.

Advertisement

Table of Contents
loading

Table of Contents