Table of Contents
Advertisement
4. ASSEMBLY
4.1 Do not connect the mains plug yet.
4.2-3 Undo tank clasps and lift off the top section assembly.
4.4 Remove contents from inside the tank. Check and identify each component
as listed in fig.1. If anything is missing or damaged please contact your
supplier immediately.
4.5a Insert a large wheel on each side of the rear basket and ensure they are
pushed all the way in.
4.5b Turn the tank upside down and insert the moulded castor mountings into
their positions in the black base. Retain each castor moulding with the
self-tapping screws provided.
4.6a For dry suction fit the paper dust bag.
4.6b For carpet washing or wet suction fit the foam filter.
4.7 Re-assemble the top to the tank.
4.8 Fasten the 2 clasps.
4.9 Attach the suction hose to the suction inlet on the front of the tank.
4.10 Push the end of the suction hose into the air diffuser handle. Push the end
of the air diffuser handle into the plastic tube. Fit the required accessory to the
base of the plastic tube or directly to the diffuser handle if the plastic tube is not
required.
5. Using a paper dust bag
www.pyleaudio.com
Advertisement
Table of Contents
