Wet Vacuum Cleaning - Pyle PUCVWD43 Instructions Manual

Wet/dry shop vac, multi-surface vacuum & carpet cleaner
Table of Contents

Advertisement

WARNING! Always disconnect the plug from the mains supply before
removing the tank cover.
5.1 IMPORTANT: The filter is made of high quality paper designed to filter
small particles of dust. We Recommend that this filter be used for dry
vacuuming only.
5.1.1 The bag must be completely dry when used to collect dry dust as a wet
or damp bag will clog quickly and be very difficult to clean.
5.1.2 Check the bag carefully and regularly for tears or small holes. Even a
small hole can cause dust to be exhausted. Never use a bag with holes or
tears as this may cause damage to the motor and invalidate warranty. Replace
it immediately.
5.2 Installing& Cleaning
WARNING! Ensure you read, understand and apply Section 1 'Safety
Instructions'.
Reminder: DO NOT vacuum hazardous substances. Use of an incorrect paper
dust bag will invalidate your warranty.
5.2.1 Ensure the machine is unplugged from the power supply.
5.2.2 Fit the paper dust bag down over the basket and push it fully home.
5.2.3 Re-position the head onto the tank, and clip in place.
5.2.4 Insert the larger end of the plastic hose into the front inlet on the tank and
lock in place. Push the required attachment onto the free end of the hose.
5.2.5 Plug into the power supply. Switch the motor to vacuum only
5.2.6 When you have completed vacuuming, turn the switch to the 'Off'.
(position 'O'), and unplug from power supply.

6. WET VACUUM CLEANING

WARNING! Ensure you read, understand and apply Section 1 'Safety
Instructions'. Reminder: Remove plug from power supply before opening
unit. DO NOT vacuum solvents, explosives, inflammable and/or
hazardous liquids such as petrol, oil, spirits, paint, thinners, acids etc.
www.pyleaudio.com

Advertisement

Table of Contents
loading

Table of Contents