Brother MFC-J5330DW User Manual page 756

Home > Machine Settings
Prefix Dial Before Every Fax Number
Set a Prefix Dial Before Every Fax Number
The Dial Prefix setting will automatically dial a predefined number before every fax number you dial. For
example: If your telephone system requires a 9 to dial an outside number, use this setting to automatically dial 9
for every fax you send.
• Use the numbers and symbols from 0 to 9, #, and *. (You cannot use ! with any other numbers or
symbols.)
• If your telephone system requires a time break recall (hookflash), press ! on the LCD.
• (Latin American countries and Canada only) If pulse dialing mode is on, # and * are not available to use.
>> MFC-J5330DW
>> MFC-J5830DW/MFC-J5930DW
MFC-J5330DW
1. Press [Settings] > [All Settings] > [Initial Setup] > [Dial Prefix].
2. Press [On] or [Off].
• You can turn off the prefix number by pressing [Off].
• The prefix number will remain off until you press [On].
3. Press [Dial Prefix].
4. Enter the prefix number (up to 5 digits) using the Touchscreen, and then press [OK].
To change the prefix number, press d or c to position the cursor under the digit to be deleted and press the
Back Space button
Repeat until the prefix number is correct, and then press [OK].
5. Press .
MFC-J5830DW/MFC-J5930DW
1. Press [Settings] > [All Settings] > [Initial Setup] > [Dial Prefix].
2. Press [On] or [Off].
• You can turn off the prefix number by pressing [Off].
• The prefix number will remain off until you press [On].
3. Press [Dial Prefix].
4. Enter the prefix number (up to 5 digits) using the Touchscreen, and then press [OK].
To change the prefix number, press d or c to position the cursor under the digit to be deleted and press the
Back Space button
Repeat until the prefix number is correct, and then press [OK].
5. Press .
Related Information
• General Settings
> Change Machine Settings from the Control Panel
. Then press the correct digit.
. Then press the correct digit.
> General Settings > Set a
749