Brother MFC-J5330DW User Manual page 149

Hide thumbs Also See for MFC-J5330DW:

Table of Contents

Skip Blank Page Sensitivity

(Available only for certain models)

Remove Background Color

To save the settings as a shortcut, press [Save as Shortcut]. You will be asked if you want to

make this a One Touch Shortcut. Follow the LCD instructions.

6. Press [Start].

7. If you are using the scanner glass, set the next page and then press [Continue]. If there are no more

pages to scan, press [Finish]. After you finish scanning, make sure you choose [Finish] before

removing the USB flash drive from the machine.

The LCD displays a message while reading the data. DO NOT unplug the power cord or remove the USB

flash drive from the machine while it is reading the data. You could lose your data or damage the USB

flash drive.

MFC-J5830DW/MFC-J5930DW

1. Load your document.

2. Insert a USB Flash memory drive into your machine.

The LCD automatically changes.

3. Press [Scan to Media].

4. Do one of the following:

To change the settings, press [Options], and then go to the next step.

To set your own default settings: after making changes to settings, press the [Set New Default]

option, and then press [Yes].

To restore the factory settings: press [Factory Reset], and then press [Yes].

Press [Start] to start scanning without changing additional settings.

The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to

complete the scanning job.

5. To scan both sides of the document (for MFC-J5930DW only), press [2-sided Scan], and then select the

document type.

2-sided Scan: Long

Select the sensitivity level for detecting blank pages in the scanned

data. The higher the sensitivity, the easier it is for the machine to

detect blank pages.

Change the amount of background color that is removed.

Scan the document so that the pages are read by flipping them on the

Mfc-j5830dw Mfc-j5930dw