When The Alarm Sounds - Sangean RCR-20 Manual

Note:
Alarm radio can only be activated when the unit is powered by an AC
adaptor. If not (i.e. your radio is disconnected from an AC adaptor, but
inserted with back up batteries), buzzer alarm (with no Humane Waking
System) will be activated instead.
7. To view the status of the alarm setting, press and release the Alarm 1 (or
Alarm2) button. To quick change the OFF/DAILY (for example) status of
the alarm, press and hold the corresponding alarm button (i.e. Alarm 1
or Alarm 2 button) for 2 seconds until you hear a beep, the "OFF" or
"DAILY" (for example) will show on the display.

When the alarm sounds

When the buzzer alarm activates, the alarm will start softly and gradually
increase in level. It will sound for 1 minute and silence for 1 minute in
repetition for 60 minutes unless cancelled. The radio will sound non-stop
at the selected time for up to 60 minutes for other alarm types.
When the radio alarm is activated, the alarm will go off in Humane Waking
System. It will increase its volume from 0 to your set volume.
To deactivate a sounding alarm, press the Standby (main power) button to
cancel a sounding alarm.
Disabling/cancelling alarms
To cancel the alarm setting before the alarm sounds, press and hold
the corresponding alarm button (i.e. alarm 1 or alarm 2 button) until a
beep sounds and "OFF" appears on the display. The alarm indicator will
disappear from the screen and the chosen alarm will now be disabled.
GB
20