Sangean RCR-20 Manual page 16

Pairing and playing your device via NFC
Your radio is equipped with wireless NFC (Near Field Communication) feature, allowing NFC-
enabled devices to pair and play the music with your radio. For non-NFC devices, please refer to the
above sections for standard Bluetooth pairing. Turn on the NFC feature on your device. Touch the
NFC area of your playing device directly against the NFC tag marked on top of your radio.
1. Turn on your NFC feature on your device. (Important: Please make sure the screen of your playing
device is on and unlocked to allow NFC to work.)
2. Touch the NFC area of your playing device against the NFC area marked on the top of your radio.
The unit will enter automatic pairing mode. If you pair the unit for the first time, some NFC enabled
devices will ask permission to link with the radio. Once paired with a device, 'Connecting RCR-20...'
or a similar message is shown on your NFC-enabled device.
3. Use the controls on your device or on your radio to play/pause and navigate tracks.
Note:
1. NFC connectivity performance may vary depending on the connected Bluetooth device. Please
refer to the Bluetooth capabilities of your device before connecting to your radio. All features may
not be supported on some Bluetooth/NFC enabled devices.
2. The location of the NFC detection area is not the same on all devices. When connecting with other
Bluetooth device s via NFC, refer to the User guide of the other device for more information.
3. Some metallic cases or covers for mobile phones may reduce the sensitivity of NFC. Make sure
you remove it, before activating the NFC.
Disconnecting your NFC-enabled device
To disconnect your device, simply touch it again on the top panel of the radio. (Important: Please
make sure the screen of your playing device is on and unlocked to allow NFC to work.)
15