Sangean RCR-20 Manual page 14

Listening music via Bluetooth streaming
You need to pair your Bluetooth device with your RCR-20 before you can
auto-link to play/stream Bluetooth music through your RCR-20. Paring
creates a 'bond' so two devices can recognize each other.
Pairing and playing your Bluetooth device for the first time
1. Press the Source button to select Bluetooth (BT) function. The "BT
PAIRING" will show on the display and "PAIRING" will flash.
2. Activate Bluetooth on your device according to the device's user manual
to link to the radio. Locate the Bluetooth device list and select the device
named 'RCR-20' (With some Smartphone's that are equipped with earlier
versions than BT2.1 Bluetooth device, you may need to input the pass
code "0000").
3. Once connected, there will be a confirmation tone sound and the display
will be changed to show "BT LINKED". You can simply select and play
any music from your source device. The volume control can be adjusted
from your source device, or directly from the radio.
4. Use the controls on your Bluetooth-enabled device or on the radio to
play/pause and navigate tracks.
Note:
1) If 2 Bluetooth devices are pairing for the first time, both must search for
your radio, it will show its availability on both devices. However, if one
device links with this unit first, then the other Bluetooth device will not
be found on the list.
2) If you take your source device out of range, the connection will be
temporarily disconnected to your radio. Your radio will automatically
reconnect if the source device is brought back in range. Be aware that
during the period of disconnection, no other Bluetooth device can pair
or link with your radio.
13
3) If 'RCR-20' shows in your Bluetooth device list but your device cannot
connect with it, please delete the item from your list and pair the device
with the radio again following the steps described previously.
4) The effective operation range between the system and the paired
device is approximately 10 meters (30 feet). Any obstacle between the
system and the device can reduce the operational range.
5) Bluetooth/NFC connectivity performance may vary depending on the
connected Bluetooth devices. Please refer to the Bluetooth capabilities
of your device before connecting to your radio. All features may not be
supported on some paired Bluetooth devices.
6) With some mobile phones, making/receiving calls, text messages,
e-mails or any other activities unrelated to audio streaming may mute
the Bluetooth audio streaming or even temporarily disconnect from your
device. Such behavior is a function of the connected device and does
not indicate a fault with your RCR-20.
Playing audio files in Bluetooth mode
When you have successfully connected your radio with the chosen
Bluetooth device you can start to play your music using the controls on
your connected Bluetooth device.
1. Once playing has started adjust the volume to the required setting using
the Volume control on your radio or on your enabled Bluetooth device.
2. Use the controls on your device to play/pause and navigate tracks.
Alternatively, control the playback using Play/Pause (
( ), Previous track buttons (
3. Press and hold the Fast-forward or Rewind button to move through the
current track. Release the button when the desired point is reached.
Note:
Not all player applications or devices may respond to all of these controls.
), Next track
) on the radio.