Display Modes - Fm; Fm Stereo (Auto)/Mono - Sangean RCR-20 Manual

Display modes – FM
Your radio has a range of display options for FM radio mode.
1. Repeatedly press and release the Info/Menu button to view the RDS
information of the station you are listening to.
a. Station name Displays the name of the station being listened
to.
b. Program type Displays the type of station being listened to
such as Pop, Classic, News, etc.
c. Radio text Displays radio text messages such as new items
etc.
d. Stereo/Mono Displays the radio broadcasting is in Stereo or
Mono mode.
e. Year/Day Displays the year and day of the week according
to the date setting of your radio.
f . Date/Day Displays the date and day of the week according
to the date setting of your radio.
g. Frequency Displays the frequency of the FM station your
listening to.
Note: If no RDS information is available, the radio will be unable to display
the station name, scrolling text and program type information.
11

FM stereo (auto)/mono

If the FM radio station being listened to has a weak signal some hiss may
be audible. It is possible to reduce this hiss by forcing the radio to play the
station in mono rather than stereo.
1. Press and release the Standby (main power) button to switch on your
radio.
2. Press the Source button as needed to select the FM radio mode display
and tune to the required FM station as previously described.
3. Press and hold the Info/Menu button until you hear a beep (then release
the button) to enter the menu setting.
4. Rotate the Tuning control knob until the FM AUTO/MONO setting shows
on the display. If the setting is Auto press the Tuning control button and
rotate the Tuning control knob to switch to Mono mode to reduce the
hiss. Press and release the Tuning control button to confirm the setting.
5. To return to Auto (Stereo) mode, press and hold the Info/Menu button
to enter the menu setting. Rotate the Tuning control knob until the "FM
MONO" shows on the display. Press and release the Tuning control
button and rotate the Tuning control knob to select AUTO. Press and
release the Tuning control button to confirm the setting.