NordicTrack 24032.0 User Manual page 11

9. While a second person holds the Console (3)
near the Upright (2), connect the wires on the
Console to the matching Wires (80, 81, 85).
Next, insert the excess wire into the Upright (2).
Tip: Avoid pinching the wires. Attach
the Console (3) to the Upright (2) with four
M4 x 16mm Screws (67); start all the Screws,
and then tighten them.
10. Hold the Rear Upright Cover (21) against the
Console (3).
See step 8. Tighten the five M4 x 16mm
Screws (67).
Next, press the tabs on the Front Upright Cover
(20) into the Rear Upright Cover (21). Then,
attach the Front Upright Cover to the Upright (2)
with an M4 x 16mm Screw (67).
9
3
Avoid pinching
the wires
10
3
21
11
85
80
2
81
20
2
67
67