Technical Data - Miele PG 8536 Operating Instructions Manual

Height
Width
Depth
Depth with door open
Weight (net)
Voltage, connected load, fuse rating
Mains cable
Water temperature: Cold water
Hot and AD water
Static water pressure
Minimum flow pressure:
Cold/hot water inlet connections
AD water connection
Recommended flow pressure:
Cold/hot water inlet connections
AD water connection
AD-water connection (non-pressurised) optional, 8.5 -50 kPa
Delivery head
Steam condenser
Ambient temperature
Relative humidity
Decreasing proportionately to
Altitude
Degree of soiling
Protection category (according to IEC
60529)
Noise level in dB (A), Sound level LpA
during cleaning and drying phases
Test marks
! mark
Manufacturer's address
#
If installed at altitudes above 1500 m the boiling point of the suds solution will be
lower. Disinfecting temperature parameters should be lowered and the holding
time increased (A
technician.
value). This must be done by a Miele authorised service
0
117.5 cm
90 cm
70 cm
126.5 cm
180 kg
See data plate
Approx. 1.8 m
max. 20 °C
max. 70 °C
Max. 1000 kPa (10 bar) pressure
100 kPa pressure
60 kPa pressure
0 250 kPa pressure
0 150 kPa pressure
min. 0.6 m, max. 1 m
Approx. 2 - 4 l/min
5 °C to 40 °C
80 % for temperatures to 31 °C
50 % for temperatures to 40 °C
#
Max. 1500 m
P2 (according to IEC/EN 61010-1)
IP20 (Dust permeation)
< 70
VDE, radio interference suppression
MDD-Guidelines 93/42/EWG, Class IIb
Miele & Cie. KG, Carl-Miele-Str. 29,
33332 Gütersloh, Germany

Technical data

71