Miele PG 8536 Operating Instructions Manual page 6

Washer-disinfector
Table of Contents

Advertisement

Warning and safety instructions
~
Take care when handling chemical
agents such as cleaning agent,
neutralising agent, rinsing agent etc.
These may contain irritant or corrosive
ingredients.
Please follow the manufacturer's safety
instructions. Wear protective gloves
and goggles. With all chemical agents,
the manufacturer's safety instructions
and safety data sheets must be
observed.
~
The washer-disinfector is designed
for operation with water and
recommended additive chemical
agents only. Organic solvents and
flammable liquid agents must not be
used in this machine.
These could cause an explosion,
damage rubber and plastic
components in the machine, and cause
liquids to leak out of the machine.
~
The water in the cabinet must not be
used as drinking water.
~
Do not sit or lean on an open door.
The machine could tip up and be
damaged or cause an injury.
~
Be careful when sorting items with
sharp pointed ends and positioning
them in the machine that you do not
hurt yourself or create a danger for
others. Sharp knives etc. should be
placed in baskets with the pointed ends
facing downwards.
6
~
Please be aware that the
washer-disinfector may be operating at
high temperatures. If the door is
opened with the emergency release
cord, there is a danger or burning,
scalding or chemical burning or if
disinfecting agents are used there is a
danger of inhaling toxic vapours.
~
Where there is a risk of toxic or
chemical substances occuring in the
suds solution (e.g. aldehyde in the
disinfecting agent), it is essential to
regularly check door seals and make
sure that the steam condenser is
functioning correctly.
Opening the machine door during a
programme interruption carries
particular risks in such circumstances.
~
Should personnel accidentally come
into contact with toxic vapours or
chemical agents, follow the emergency
instructions given in the manufacturer's
safety data sheets.
~
Mobile units, modules, inserts and
the load must be allowed to cool down
before unloading the machine. Any
water remaining in containers could still
be very hot. Empty them into the wash
cabinet before taking them out.
~
After using the hot air drying unit,
open the door to allow everything in the
cabinet from the load itself to the
mobile units, modules and inserts to
cool down.
~
Do not touch the heating elements if
you open the door directly after the end
of a programme; you could burn
yourself. They remain hot for some time
after the end of the programme.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents