Fm Radio Operation - Audiovox VOH704 Operation Manual

4. To ERASE a channel, press the ERASE/WRITE
button on the Remote Control Unit until "MANUAL
MEMORY XX ERASE" is displayed on screen.
To STORE a channel, press the button until the
MANUAL MEMORY XX ADD is displayed on
screen.
Note : Please refer to page 2 for more information on
TV reception.

FM Radio Operation

1. If using wired headphones, insert the headphone
set plug into the headphone jack on the right side
of the LCD pod labelled RADIO EAR. If using a
wireless headset, switch the Channel A/B switch
to channel B for the FM radio. Channel A is used
for the video audio.
2. Press the Radio power on button. The LCD
window will display the FM station frequency and
memory channel number.
3. Press the tuning UP or DOWN button to select
the desired radio station.
4. If the radio station is broadcasting in stereo, then
LCD window will display STEREO.
5. Press the Memory button and select the preset
number you wish to assign. The number can be
selected from 1 to 6 sequentially. The selected
number will flash. Press and hold the memory
button until the display stops flashing. The preset
then be displayed continuously.
6. Pressing the Recall button will scroll through the
six presets.
7. Pressing the Volume UP or DOWN button in the
remote control unit will set the desired volume
level in the headphones.
8. Press the Mute button on the remote control unit
to mute the sound in headphone and press Mute
button again, to restore the sound to the original
level.
Turning the VOH704 On or Off
1. Sliding the screen release lock forward will
unlock the LCD screen and it will drop down
slightly. Pivot the screen downward until a
comfortable viewing angle is reached. The
internal friction detent will hold the screen in
position while the system is in use.
2. Pressing the power button on the pod or the
remote will turn the system on or off alternately.
When in use the internal backlighting will
illuminate the controls.
3. After the unit has been turned on and is
displaying a picture, adjust the viewing angle,
by pivoting the screen to optimize the picture
quality.
4. Remember to turn the unit off and pivot the LCD
to the locked position when not in use.
-10-
128-6117
10 of 16