Advertisement
Clean air system
Highlights
6-stage Clean air system
The advanced and innovative 6-stage Clean air
system removes and sterilizes even the finest
particles and a wide spectrum of gases and odours. *
The 3-stage Electro-clean filtration system efficiently
removes particles * The 2-stage FreshAir filtration
system removes gases and odours * The active
oxygen sterilizes trapped particles and constantly
rejuvenates the zeolite filter, ensuring longlasting
superiour performance.
3-stage Electro-clean system
The 3-stage Electro-clean filtration system works
three ways. * First, the pre-filter blocks larger
particles, such as hairs, animal dander and house dust
allergens. * Second, the finer particles that have
passed through the pre-filter, including bacteria and
viruses, are charged by the Corona field charger. *
Third, the Electro-Static Precipitation (ESP) filter
attracts these charges particles to its surface and
keeps them safely trapped.
Issue date 2012-02-16
Version: 4.1.1
12 NC: 0000 000 00000
Active oxygen
The active oxygen, which is generated by the Corona
Field Charger, sterilizes harmful germs such as
bacteria and viruses that are trapped in the Electro-
Static Precipitation (ESP) filter. It then passes
through the zeolite filter, where it oxidizes the
trapped gases, rendering them harmless. Thanks to
this process, the zeolite filter is constantly
rejuvenated and its life can be extended over many
years.
2-stage Fresh air filtration
The 2-stage Fresh air filtration system uses advanced
Nano-Confined Catalytic Oxidization (NCCO)
technology. Firstly, the hi-grade zeolite filter traps a
wide spectrum of gases and odours and subsequently
uses the active oxygen that passes through to
neutralize them, constantly rejuvenating the filter.
Compared to the traditional activated carbon filter,
this hi-grade zeolite filter performs more stably in
different humidity conditions, and because it is
rejuvenated by the active oxygen, it can last a much
longer life of upto five years.
© 2012 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
www.philips.com
AC4062/00
Specifications
Design specifications
• Product dimensions (W x D x H): 481 x 220 x
490 mm
• Product weight: 7.9 kg
Replacement
• ESP particle filter: AC4106
• Zeolite gas filter: AC4116
Technical specification
• Frequency: 50/ 60 Hz
• Voltage: 220-240 V
• Cord length: 1.8 m
• Noise level: < 47 (JIS compliance) dB
• Effective area: up to 40 m²
• Operating relative humidity: 20 - 90 %
• Power consumption: 65 (at 220-240V, hi speed) W
Performance
• CADR: > 128 ft³/min
• Gas removal efficiency: > 99 (run at hi speed over
3 mins inside 1m3 box) %
• Particle removal efficiency: > 99 (particle size at
0.02 - 10 µm) %
Finishing
• Color - air outlet mesh/ control panel: christal
silver
• Color - control button: silver blue
• Color - front cover/ air inlet mesh: christal silver
• Color - rear housing: translucent algiers blue
Key specifications
• Operating temperature: 5 - 40 °C
•
Advertisement
