General Description - Subaru forester 2001 Service Manual

Front Suspension

1. General Description

A: SPECIFICATIONS
1. STABILIZER
S202001E4901
Model
NON-TURBO 19 mm (0.75 in)
TURBO 20 mm (0.79 in)
2. WHEEL ALIGNMENT
Camber (tolerance: ±0°30')
Caster (common difference: ±0°45')
Toe-in
Kingpin angle
Wheel arch height
+12 +0.47
[tolerance: / mm (
−24
*: When performing toe-in adjustment, align as close to 0 mm (0 in) as possible.
NOTE:
¼ Front and rear toe-ins and front camber can be
adjusted. If toe-in or camber tolerance exceeds
specifications, adjust toe-in and camber to the
middle value of specification.
¼ The other items indicated in the specification
table cannot be adjusted. If the other items
exceeds specifications, check suspension parts
and connections for deformities; replace with new
ones as required.
GENERAL DESCRIPTION
S202001
S202001E49
Bar dia.
Front Rear
13 mm (0.51 in)
15 mm (0.59 in)
S202001E4902
Model
/ in)
−0.94
NON-TURBO
−0°15'
−0°37'
0±3 mm (0±0.12 in)*
Each toe angle: ±0°09'
13°25'
432 mm (17.01 in)
(1) Front
A − B = Positive: Toe-in, Negative: Toe-out
α = Each toe angle
FS-2
TURBO
−0°20'
−0°57'
13°40'
422 mm (16.61 in)
B4M2250B