Champion AWF410 User Manual page 5

6. HDMI mode:
(1) Connect the TV HDMI-input and the soundbar's HDMI-output with the HDMI cable.
(2) Connect the DVD HDMI-output and the soundbar's HDMI-input with the HDMI cable.
If your TV/DVD supports CEC function, they can control each other based on the CEC protocol.
If your TV supports ARC function, TV sound can go through the HDMI cable to the sound bar.
Note 1: In Optical-in mode, coaxial-in mode or
HDMI mode your player needs to be set to PCM audio output
Note 2: In all modes, if there is no signal input, the product will enter
standby after 15 minutes
Wi-Fi speaker web settings
1. When you turn on the speaker, WiFi will automatically start.
2. After PC or smart phone connects the product through Wi-Fi (The default SSID is AWF***_XXXX, XXXX is a random
number), Customer access the site: http://10.10.10.254 and enter the setting page. There are two tabs:
Wi-Fi and Setting.
3. Wi-Fi tab: To setup the connection between Wi-Fi speaker and APP. Customer use a PC/MAC or smart phone to
access internet through Wi-Fi speaker after connected.
Setting tab: There are 3 sub tabs in setting tab: Status, System and Network.
4.
( 1 )Status tab: View the firmware version, UUID of Wi-Fi speaker.
( 2 )System tab: Reset the Wi-Fi speaker and local upgrade firmware in "Other" option and online upgrade firmware in
"Firmware Online Upgrade".
ENG