Remote Control; Playing Music - Champion AWF410 User Manual

ENG

Remote Control

1. POWER:
2. MUTE:
3. VOL+:
4. VOL-:
5. PREVIOUS:
6. NEXT:
7. PLAY/PAUSE:
8. SOURCE:
9. EQUALIZER:
10. PAIR:
Mode
Wi-Fi mode
Bluetooth connected
11. BASS-:
12. BASS+:

Playing Music

1. Wi-Fi mode:
• Use the app "CHAMPION WIFI" to search for AWF410_xxxx and add it to the management list. If you want two
speakers or more to play the same music at the same time (Multiroom mode), carry out the corresponding operation
according to the "CHAMPION WIFI" app.
• Automatically install the "CHAMPION WIFI" app by Android Market or App Store. In the Android Market or App Store
search "CHAMPION WIFI ", then download and complete the installation.
2. Bluetooth mode:
(1) Press "SOURCE" to go to Bluetooth mode, search for Bluetooth devices "AWF410_xxxx" in your device and then
pair.
(2) If you need to switch to another Bluetooth terminal, long press the pairing key. The indicator light flashes, once
again into the Bluetooth pairing state, repeat steps (1).
(3) If the Bluetooth terminal is successfully paired before shutdown, the soundbar will automatically connect to the last
successfully paired terminal after the next boot (do not need reconnection), the indicator light does not flash.
3. Aux-In mode:
(1) Use the included 3 head RCA audio cable and use the red/white colored RCA plug.
(2) Find the analog audio out on the back of the TV and connect one end of the cable to the matching colors, red to
red and white to white.
(3) Connect the other end of the cable to the back of the soundbar's AUX red/white connection.
4. Optical-In mode:
(1) Use the optical fiber cable.
(2) Find the optical output port on the back of the TV and connect one end of the cable to it.
(3) Connect the other end of the cable to the back of the soundbar's optical connection.
5. Coaxial-In mode:
(1) Use the RCA audio cable.
(2) Find the coaxial output port on the back of the TV and connect one end of the cable to it.
(3) Connect the other end of the cable to the back of the soundbar's coax connection.
Turn the soundbar ON/OFF
Silences the soundbar
Increase the volume
Decrease the volume
Switches to the previous song when
the soundbar is connected to your device
through Bluetooth or Wi-Fi connection.
Switches to the next song when the soundbar
is connected to your device through Bluetooth
or Wi-Fi connection.
Plays or pauses a song when the soundbar is
connected to your device through Bluetooth or
Wi-Fi connection.
Changes the input of the soundbar.
Switch different preset equalizer settings for the speaker
Standby
Decrease the bass effect of the soundbar
Increase the bass effect of the soundbar
Long press
Connect slave speaker to main speaker
Disconnect Bluetooth
Close Wi-Fi hotspot