H3C S5820 series Command Reference Manual page 211

one-off: Specifies that the specified command is executed for once.
repeating: Specifies a recurring time schedule.
date: Specifies an execution date, in the MM/DD/YYYY or YYYY/MM/DD format. The YYYY value
ranges from 2000 to 2035, the MM value ranges from 1 to 12, and the DD value ranges from 1 to 31.
The specified execution date must be ahead of the current date.
month-date month-day: Specifies the date for executing the command. month-day specifies the date, and
ranges from 1 to 31.
week-day week-daylist: Specifies the day or days for executing the command. The week-daylist argument
specifies one day or up to seven days, which can be any combination of Sun, Mon, Tue, Wed, Thu, Fri,
and Sat. For example, to have a command executed on Monday, you can enter week-day Mon; to have
a command executed on Friday and Saturday, enter week-day Fri Sat. Use a space between every two
days for separation.
command command: Specifies the command to be automatically executed, in the text format. The
command must be executable in the view specified by the view command. Otherwise this command
cannot be automatically executed. Therefore, ensure the correctness of the configuration.
Usage guidelines
The commands in a job must be in the same view.
Every job can have up to 10 commands.
The time ID (time-id) must be unique in a job. If two time and command bindings have the same time ID,
the one configured last takes effect.
Changing a clock setting does not affect the schedule set by using the time at command.
Use Table 41
Table 41 Command schedule options
Command
time timeid at time date command
command
time timeid one-off at time command
command
time timeid one-off at time month-date
month-day command command
time timeid one-off at time week-day
week-daylist command command
time timeid repeating at time command
command
time timeid repeating at time month-date
month-day command command
when you add commands in a job.
Description
Schedules a command to run at a specific time and date. The
time or date must be later than the current system time or date.
Schedules a command to run at a specific time on the current
day. If the specified time has passed, the command runs the next
day.
The command runs only once.
Schedules a command to run at a specific day in the current
month. If the specified time or day has passed, the command
runs in the next month.
The command runs only once.
Schedules a command to run at a specific time on a specific day
or days in the current week. If the specified time or day has
passed, the command runs in the next week.
The command runs only once.
Schedules a command to run at a specific time every day.
Schedules a command to run on a specific day every month.
197