Installing The Battery; Daylight Saving Time (Dst) / Summer Time - Electrohome EAAC302 User Manual

1.8" jumbo alarm clock radio
Hide thumbs Also See for EAAC302:
Table of Contents

Advertisement

Available languages

Available languages

INSTALLING THE BATTERY

1.
Using a small Phillips Head screwdriver, loosen the screw on the battery panel on
the bottom of the unit.
2.
Remove the battery compartment panel.
3.
Remove/properly dispose of depleted battery and replace with new, 3V, CR2032
Flat Lithium battery.
4.
Close the battery compartment and tighten the screw into place to secure battery
panel.
Batteries must be installed by an adult.
• Use only the recommended size and type of battery specified.
• Please be sure to follow the correct polarity when installing the battery
in the battery compartment. A reversed battery may cause damage to
the alarm clock.
• When not using the unit for a prolonged period of time, please remove
the battery to avoid possible damage caused by a leaking battery.

DAYLIGHT SAVING TIME (DST) / SUMMER TIME

Daylight Saving Time/Summer Time is automatically preset.
• Daylight saving time begins at: 2:00 AM on the second Sunday of March.
• Standard time begins at: 2:00 AM on the first Sunday of November.
Cancelling / reactivating Automatic DST / Summer Time
To CANCEL DST / Summer Time, press and hold the DST button for 3 seconds while
1.
the radio is OFF.
'OFF' will appear in the display to show that the Automatic DST/Summer Time
2.
adjustment is cancelled. The display will return to the clock.
OPERATING INSTRUCTIONS
- 13 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eaac302w

Table of Contents