Terminology; Display During Microbubble (Mb) No-Stop Phase; Display During Level Stop Phase - Uwatec Smart 2 Operating Manual

2 Terminology

This chapter will exclusively deal with terminology and display features used while diving with MB levels.
All other features are described in chapter III (page 15).

2.1 Display during microbubble (MB) no-stop phase

MB level
An MB level
between L1 and
L5 was chosen.
CNS O %
2
NO STOP
MB no-stop time
Remaining time at a
respective depth allowing
ascent without level stop.
29.9 m

2.2 Display during level stop phase

Total ascent time
including level stops
CNS O %
2
LEVELSTOP
Level stop depth
The deepest level
stop is displayed.
Level stop duration
The duration of a level
35.7m
stop at a given level
stop depth is displayed.
UWATEC Smart dive computers
®
MB no-stop phase
Dive phase during which surfacing is
possible without MB level stop.
Time
Dive time
Current depth
Maximum depth
Time
MB no-stop phase
Level stop phase
21min MB no-stop time
Total ascent time (14 min)
3m/10ft
6m/20ft
Lowest level
9m/30ft
stop depth
3 min
Level stop duration
Level stop phase
To complete the dive without being
reduced to a lower MB level all
requested level stops must be
observed.
V
29