Measurement - Vive DMD1001 User Manual

BEFORE YOU START
4.Repeat step 2 and 3 to set
the [MONTH] and [DAY].
6.Repeat step 2 and 3 to set the [UNIT].
7.After the unit is set, the LCD will display
"done" first, then display all the settings you
have done and then it will turn off.
8
5.Repeat step 2 and 3 to set the [HOUR]
and [MINUTE].
Applying the cuff
1.Apply the cuff on your upper arm.
Make sure the position of the tube
is off-center; toward the inner side of arm
in line with the little finger.
2.The cuff should be snug but not
too tight. You should be able to
insert one finger between the
cuff and your arm.
3.Sit comfortably with your test
arm resting on a flat surface.
4
.Patients with Hypertension:
The middle of the cuff should be
at the level of the right atrium of the heart;
Before starting measurement, please sit
comfortably with legs uncrossed,
feet flat on the floor, back and arm supported.
Resting For 5 minutes before
measuring.
Wait at least 3 minutes between
measurements. This allows your
blood circulation to recover.
For a meaningful comparison,
try to measure under similar
conditions. For example, take daily
measurements at approximately
the same time, position of upper
arm, or as directed by a physician.

MEASUREMENT

9