Data Management; Recall The Records - Vive DMD1001 User Manual

DATA MANAGEMENT

Recall the Records

1. When the monitor is off,
press the "MEM" to show the average
value of the latest three records for
the selected user.
(Take User 1 for example.)
2. Press "MEM" button or "SET" button to rotate the history records. Press
"MEM" button to review the record from the latest to the oldest. Press
"SET" button to review the record from the oldest to the latest.
The date and time
of the record
will be shown
The current No. is No 2.
alternately.
CAUTION
The most recent record (1) is shown first. Each new measurement is
assigned to the first (1) record. All other records are pushed back one
digit (e.g., 2 becomes 3, and so on), and the last record (60) is dropped
from the list.
12
UP
The corresponding The corresponding
date is January 1st. time is P.M. 10:08.
3. If you want to check another user's records, press START/STOP button to
turn off the monitor when it is in the memory recall mode. Then press "SET"
button to turn on the monitor, press "SET" button again to select the desired
user ID, when it displays your desired user ID, press START/STOP button to
confirm, the LCD will turn off. Then press "MEM" button to review the selected
user's records.
4. If there is no record, the following display will be shown.
DOWN
(Take User 1 for example.)
DATA MANAGEMENT
13