ASPERA F26 User Manual page 9

Properly keep the mobile phone and its fittings such as the SIM cards beyond children's reach.
Installation
 Hold the red hang up button for a few seconds to power off the mobile phone.
 Lift the back cover from the bottom left corner (there is an indent) and remove the cover.
 Pull the battery up from the top centre and then lift the battery away.
 Insert the SIM card into the SIM card slot lightly with the corner cutting of the card aligning to the notch
of the slot and the gold plate of the card facing downward aligning the sim card connectors with those of
the phone.
 With the metallic contacts of the battery facing the metallic contacts in the battery slot, press the battery
down until it locks into place. You can then re-install the back cover.
 Using code
The mobile phone and the SIM cards support passwords, in order to prevent the phone and the SIM
cards from unauthorized usage. When you are prompted to input any of the codes mentioned below, just input
the correct code and then press the ok key. If you input a wrong code, press the Right soft key under the
screen to clear it and then input the correct code.
 Phone lock code
The phone lock code may be set to prevent your mobile phone from being misused. In general, this code
is provided along with the mobile phone by the manufacturer. The initial phone lock code is set to 0000 by
the manufacturer. If the phone lock code is set, you need to input the phone lock code when powering on the
mobile phone.
 PIN
9