Charging The Battery - ASPERA F26 User Manual

To install an SD card, slide the metal cover and lift up, insert the card into the card slot and lock the metal
cover.
To remove the SD card, slide the metal cover, lift up and remove the SD card.
Note:
1. The mobile phone cannot automatically identify the SD card being inserted when the mobile phone is
powered on. You must power off the mobile phone and then power it on, so that the phone can identify the SD
card.
2. The SD card is a small object. Keep it out of the reach of small children for fear that they may swallow it.
2.3

Charging the Battery

The lithium-ion battery delivered with the mobile phone can be put into use immediately after being
unpacked. At first charge please charge it fully by connecting to charger for 6 hours.
Battery level indication:
 Your mobile phone can monitor and display the battery state.
 The remaining energy of the battery is indicated by the battery level icon at the upper right corner of the
display screen.
 When the battery energy is insufficient, the mobile phone prompts "Battery low". If you have set an alert
tone, an alert tone will be given off when the battery level is too low.
 A charging animation appears when the battery is being charged.
 Install the battery into the mobile phone before charging the battery.
 Connect the adapter of the travel charger with the charging port in the mobile phone. Ensure that the
adapter is fully inserted.
11