Powering On/Off The Mobile Phone - ASPERA F26 User Manual

close to room temperature.
 Immediately stop using the charging process if the battery produces odor, overheats, cracks, distorts or
has other damage, or if the electrolyte leaks.
 The battery wears out with use. A longer charging time is required as the battery is put into use for a long
time. If the total conversation duration decreases but the charging time increases even though the battery
is properly charged, purchase a standard Aspera battery. Using any poor-quality fittings will cause harm
to your mobile phone and may be dangerous.
Note: To guarantee your personal safety and protect the environment, be careful if disposing of the battery.
Return the old battery to Aspera or place it in specified battery reclamation areas. Do not dispose of the
battery with normal household waste.
Warning: Short-circuits of the battery may cause explosion, fire, personal injury or other severe
consequences.
2.4

Powering On/Off the Mobile Phone

Hold the red End call key for a few seconds to power on the mobile phone. The end-call key has a power
symbol on it. A power-on animation appears on the display screen displaying the ASPERA logo.
Input the phone lock code and press the ok key if the mobile phone prompts you to input the phone lock code.
The original code is 0000.
Input the PIN and press the ok key if the mobile phone prompts you to input the PIN. The PIN is provided by
the network operator for new opening SIM card.
Enter the standby interface.
To power off the mobile phone, hold the End call key for a few seconds.
13