Linking To The Network; Making A Call And Adjusting Call Volume - ASPERA F26 User Manual

2.5

Linking to the Network

After the SIM card is inserted and the mobile phone is successfully unlocked, the mobile phone automatically
searches for an available network. After finding a network, the mobile phone enters the standby state. When
the mobile phone is registered on the network, the name of the network operator is displayed on the screen.
Then you can dial or receive a call.
2.6

Making a Call and adjusting call volume

In the standby interface, press number keys to input the area code and the telephone number, and then press
the Dial key to dial a call. To end the call, press the End key.
 Dialing an international call
Press the * key twice to input "+". Then input the country code, the area code and the telephone number.
Finally, press the Dial key.
 Dialing to a number in the phonebook
Enter the phonebook by pressing the key under Names which is displayed at bottom right of the screen,
and use the navigational direction keys to find the telephone number you want to call. Once in the Phone
book you can also enter a letter to bring up all Contacts starting with that letter. Scroll to the desired Contact.
Press the green Dial key. The mobile phone automatically dials the chosen telephone number.
You can also access the phone book directly by pressing the bottom section of silver around the centre
menu button.
Redialing the last number
In the standby interface, press the dial key to show the dialed calls.
Press the up or down direction keys to select a number you want to dial and then press the Dial key.
14