Siemens Simatic ET 200SP Manual page 10

Product overview
2.1 Properties
Properties
The module has the following technical properties:
● Digital output module with 16 outputs
● Source output (PNP, P-switching)
● Supply voltage L+
● Output current 0.5 A (per channel), total current max. 8 A
(see derating: Technical specifications (Page 22))
● Configurable diagnostics (per module)
● Configurable substitute values (per channel)
● Suitable for solenoid valves, DC contactors, and indicator lights
● Safety-related shutdown
The module supports the following functions:
● Firmware update
● I&M identification data
● Configuration in RUN
● PROFIenergy
Table 2- 1
Value status
You can configure the module with STEP 7 (TIA Portal) and with a GSD file.
Accessories
The following accessories must be ordered separately:
● Labeling strips
● Color identification labels
● Reference identification label
● Shield connector
See also
You can find additional information on the accessories in the system manualET 200SP
distributed I/O system (https://support.industry.siemens.com/cs/ww/en/view/91696622).
10
Version dependencies of other module functions
Function Product version of the module
as of
1
Digital output module DQ 16x24VDC/0.5A ST (6ES7132-6BH00-0BA0)
Firmware version of the
module as of
V1.1.0
Manual, 12/2015, A5E03574420-AC