Table of Contents
Advertisement
Turning on the power
Make sure that all peripheral devices are connected properly betore
turning on the power.
6
.
.
-
CD
AC IN socket
Connector
~
..
(~
-
f.j\
Connect the accessory power cord to the AC IN
\..V
socket.
• Insert the connector into the AC IN socket so that the shape ot the
connector matches the shape of the socket. Then insert the power
cord plug into the wall outlet.
• The POWER button on the projector will illuminate
red.
f2\
Press the POWER button.
\!F:J •
The POWER button on the projector will flash green. After a short
period
,
it will illuminate green, and the startup logo will be displayed.
If you would like the startup logo not to be displayed, set "STARTUP
LOGO" to
"OFF'.
(Refer to page 49.)
f3\
Turn on the power of all connected devices.
~
• Start the play function of a device such as a DVD player.
NOTE:
• A tinkling sound may be heard when the lamp unit is turned on, but this
is not a sign of a malfunction.
26-ENGLISH
Advertisement
Table of Contents
