Table of Contents
Advertisement
Turning off the picture and sound
momentarily (SHUTTER)
The "SHUTTER" function can be used to momentarily turn off the picture and
sound from the projector when the projector is not being used for short
periods of time, such as during breaks in meetings or when carrying out
preparation. The projector uses less power in "SHUTTER" mode than it does
in normal projection
mode.
Press the SHUTTER button.
• The picture and sound will be turned off.
• Press any button on either the projector or
remote control unit to return to normal operating
mode.
NOTE:
• You can also select "SHUTTER" from the on-
screen menu (refer to page 53).
·
'
1141
Adjusting the volume (VOLUME)
You can adjust the volume of the sound that is output from the
projector's
built-in
speaker and VARIABLE AUDIO OUT connector.
Press the VOLUME +/- button.
• Press the + button to raise the volume.
• Press the - button to lower the volume.
NOTE:
• You can also select "VOLUME" from the on-
screen menu (refer to page 52).
32-ENGLISH
Advertisement
Table of Contents
