Coolant Level - Check; Fuel Control Link - Check; Fig. 3-16 Radiator Filler Cap; Fig. 3-17 Radiator Coolant Level - Mitsubishi S16R-Y1PTA Operation & Maintenance Manual

Chapter 3 OPERATION

Coolant level - Check

Remove the radiator cap only after the engine has
cooled to room temperature. Place a waste cloth
over the cap, and loosen the cap about a half-turn or
stand the lever to the upright position to release inter-
nal pressure. Never open the radiator filler cap while
the engine is hot, otherwise the steam or hot coolant
spurts out and you may be scald with it.
1. Open the radiator filler cap and check the coolant
level.
2. If the coolant level is low, add coolant to the speci-
fied level.
Always use the coolant with the same LLC concen-
tration.
Note: Determine the quantities of LLC based on the
coolant capacity and the LLC concentration
chart.
For the coolant, refer to
the coolant capacity, refer to
TIONS" (12-1).
3. If a reserve tank is equipped, fill the reserve tank
with coolant up to the "FULL" level line.

Fuel control link - Check

Check fuel control link for smooth movement.
Also check ball joint for looseness and play.
3-10
"COOLANT" (6-1). For
"MAIN SPECIFICA-
Stand the lever to
Turn the cap about
the upright position
half a turn

Fig. 3-16 Radiator filler cap

Fig. 3-17 Radiator coolant level

Fig. 3-18 Reserve tank coolant level

Fig. 3-19 Fuel control link - Check