Engine Oil Level - Check; Fig. 3-15 Oil Filler And Oil Level Gauge - Mitsubishi S16R-Y1PTA Operation & Maintenance Manual

Engine oil level - Check

Refilling engine oil must be specified level. If the
refilling oil goes over the high marks on the oil level
gauge, engine oil may blow out.
1. Pull out the oil level gauge and wipe it clean using
a waste cloth.
2. Insert the oil level gauge fully into the oil level
gauge guide, then pull out the gauge again.
3. The proper oil level is between the high and low
marks on the oil level gauge.
4. If the oil level is low, remove the oil filler cap and
add engine oil of the specified type to the high lev-
el.
5. Install the oil filler cap after refilling.
6. Check the oil pan and other area for oil leaks.
Chapter 3 OPERATION
Oil filler
Oil level gauge

Fig. 3-15 Oil filler and Oil level gauge

Oil level gauge
Improper
High
H
Proper
L
Low
Improper
3-9