Specifications; Ec Declaration Of Conformity - Makita DST110 Instruction Manual

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Trigger
2-2. Lever
4-1. Lever
5-1. Trigger
6-1. Sub magazine

SPECIFICATIONS

Applicable staples length
Staple magazine capacity
Dimensions (L x W x H)
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for pressing staples into
construction materials such as timbers.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power
•
tool can differ from the declared emission value
depending on the ways in which the tool is used.
Explanation of general view
6-2. Locking lever
6-3. Press
7-1. Main magazine
7-2. Staples
9-1. Groove
9-2. Hook
9-3. Screw
10-1. Trigger
Model
Staple width
Net weight
Rated voltage
) : 76 dB (A)
pA
value (tri-axial vector
2
) : 2.5 m/s or less
h
2
ENE054-1
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
ENG905-1
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only

EC Declaration of Conformity

We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
ENG900-1
Cordless Stapler
Model No./ Type: DST110
sum)
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
ENG901-1
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
3
10-2. Material
12-1. finestella
12-2. Pusher
12-3. Staples
13-1. Sub magazine
13-2. Locking lever
13-3. Press
DST110
10 mm
7 mm - 10 mm
125 pcs
245 mm x 79 mm x 191 mm
2.0 kg
D.C. 14.4 V
Corporation as the
ENH101-15
responsible