1. Manuals
  2. Brands
  3. Makita Manuals
  4. Power Tool
  5. DST121
  6. Instruction manual

Makita DST121 Instruction Manual

Cordless stapler
Hide thumbs
Table of Contents

Advertisement

Quick Links

INSTRUCTION MANUAL
Cordless Stapler
DST121
Read before use.

Advertisement

Table of Contents
loading

Related Manuals for Makita DST121

Summary of Contents for Makita DST121

  • Page 1 INSTRUCTION MANUAL Cordless Stapler DST121 Read before use.

  • Page 2: Specifications

    SPECIFICATIONS Model: DST121 Staple width 10 mm Applicable staples length 13 mm - 25 mm Staple magazine capacity 100 pcs Dimensions without hook with BL1815N 244 mm x 79 mm x 216 mm (L x W x H) with BL1860B...

  • Page 3: Ec Declaration Of Conformity

    Do not abuse the cord. Never use the cord for WARNING: The vibration emission during carrying, pulling or unplugging the power tool. actual use of the power tool can differ from the Keep cord away from heat, oil, sharp edges declared value(s) depending on the ways in which or moving parts.
  • Page 4 Battery tool use and care Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Use power tools only with specifically desig- nated battery packs.
  • Page 5 If electrolyte gets into your eyes, rinse them causing fires, personal injury and damage. It will out with clear water and seek medical atten- also void the Makita warranty for the Makita tool and tion right away. It may result in loss of your charger.

  • Page 6: Functional Description

    Tips for maintaining maximum CAUTION: Always install the battery cartridge battery life fully until the red indicator cannot be seen. If not, it may accidentally fall out of the tool, causing injury to Charge the battery cartridge before completely you or someone around you. discharged.

  • Page 7: Overload Protection

    Overload protection Adjusting the depth of driving When the tool/battery is operated in a manner that causes it to draw an abnormally high current, the tool WARNING: Always make the battery cartridge automatically stops without any indication. In this sit- and staples are removed before adjusting the depth uation, turn the tool off and stop the application that of driving.

  • Page 8: Loading Staples

    Load staples into the main magazine with their ASSEMBLY feet facing up. CAUTION: Always make sure that the battery cartridge is removed before carrying out any work on the stapler. Staples CAUTION: Do not use staples other than designated in this manual or staples that appear to be damaged, bent, rusty or corroded.

  • Page 9: Operation

    Only touch the contact element against the mate- Hook rial without pulling the switch trigger. CAUTION: Do not hang the hook from the waist belt. Dropping the stapler, which is caused by the hook accidentally coming out of place, may cause unintentional firing and result in personal injuries.

  • Page 10: Maintenance

    Reload staples when no remaining staples can be seen To maintain product SAFETY and RELIABILITY, in the sight window. repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION:...
  • Page 12 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885791-228 www.makita.com 20200304...

Table of Contents