3-2. Using the audio system
Changing the passkey
Select "Passkey" using
STEP
1
Select a 4 to 8-digit passkey using
STEP
2
Input the number 1 digit at a time.
When the entire number to be registered as a passkey has
STEP
3
been input, press
If the passkey to be registered has 8 digits, pressing
is not necessary.
Setting automatic connection of the device on or off
If "BT Power" is set to on, the registered device will be connected
automatically when the "ENGINE START STOP" switch is tuned to
ACCESSORY mode (vehicles with smart entry & start system) or
engine switch is turned to the "ACC" position (vehicles without smart
entry & start system).
Select "BT Power" using
STEP
1
Select "ON" or "OFF" using
STEP
2
460
AVENSIS_OM_OM20B88E_(EE)
.
.
again.
.
.
again