Doors And Locks; Locking And Unlocking - Ford c-max hybrid 2017 Owner's Manual

LOCKING AND UNLOCKING

You can use the power door lock control
or the remote control to lock and unlock
your vehicle.
Note: Always take your keys and lock all
doors when leaving your vehicle.
Power Door Locks
The power door lock control is on the driver
and front passenger door panels.
A
B
E162487
A Unlock
B Lock
Door Lock Indicator
An LED on each power door lock control
will light when you lock the doors. It is not
a functional control.
Remote Control
Unlocking the Doors (Two-Stage
Unlock)
Type 1
Press the button to unlock the
driver door.
Type 2
Press the button to unlock the
driver door.
E138629
C-MAX Energi / C-MAX Hybrid (CCG) Canada/United States of America, enUSA, First Printing

Doors and Locks

Press the button again within three
seconds to unlock all doors. The turn
signals will flash.
Press and hold both the lock and unlock
buttons on the remote control for four
seconds to disable or enable two-stage
unlocking. Disabling two-stage unlocking
allows all vehicle doors to unlock with one
press of the button. The turn signals will
flash twice to indicate a change to the
unlocking mode. The unlocking mode
applies to the remote control and
intelligent access.
Intelligent access at the driver door will
unlock all doors when you disable
two-stage unlocking.
Locking the Doors
Type 1
Type 2
E138623
Press the button again within three
seconds to confirm that all the doors are
closed. The doors will lock again, the horn
will sound and the turn signals will flash if
all the doors and the luggage
compartment are closed.
Note: If locking was not successful or any
door or the liftgate is open, or if the hood is
open on vehicles with a perimeter alarm or
remote start, the horn will sound twice and
the lamps will not flash.
Liftgate
57
Press the button to lock all the
doors. The turn signals will flash.
Press the button to lock all the
doors. The turn signals will flash.
WARNINGS
Make sure all persons are clear of the
power liftgate area before using the
power liftgate control.