Oce arizona 1240 GT User Manual page 72

Step and Repeat Printing
3. Fill in the Rows and Columns fields by either clicking on the upward pointing triangle or within
the field to use the virtual keypad that appears.
NOTE
You can also click on the Fill area... button to have the grid created automatically based
on the dimensions of the image, the size of the media, and the number of copies. If you
use this method set the number of copies first.
Also, if you enter more columns and rows than it is possible to fit on the media, the
fields will revert back to their previous number and turn red to alert you to this
problem. Re-enter numbers that will allow the image to fit on the media.
4. Click on the up/down triangles or in the field labeled Copies to set the number of copies required.
You will see a visual representation of the grid in the Preview area and get from it an idea of how
your requested copies fit on the media. If the number of copies exceeds the size of the media you
will see how many media sheets are required displayed at the bottom of the Step and Repeat
area.
5. To set a gap (if required) between the prints in the grid click on the Vertical gap and Horizontal
gap fields and use the Virtual keypad to enter the size of the gaps. The Preview will display the
gaps.
6. When the Step and Repeat setup is complete, select the Print icon to add the job to the active list
and then select Start print to send the job to the printer.
NOTE
If more than one piece of media is required for the job, the carriage will return to its
parked position and wait for you to place a new piece of media, confirm media height,
and select the Start print icon before it continues the job.
72 Chapter 5 - How to Operate Your Océ Arizona Printer
Océ Arizona 1200 Series