Oce arizona 1240 GT User Manual page 103

3. Click on the Roll Manager icon to enter the Roll Media Manager dialog window.
4. Enter the Media width for the roll media that you have loaded.
NOTE
If the media width entered is less than 1067 mm (3.5 ft) the standard nozzle check will not
fit across the media.
Nozzle Check print: 617.3 x 73.7 (32.03 x 0.24 ft)
5. Check that the rest of the media parameters displayed match the particular media you loaded.
6. You can create a new media or edit an existing one by changing the parameter values and then
saving them under a new media name. When you create a new media it takes the current values
as default and automatically creates a unique media name based on the existing name.
NOTE
Any changed parameter in the dialog window will be applied to the next roll media
print job, even if the change was not saved. This allows temporary changes to the
parameters without the need to save that media.
NOTE
There is always at least one media in the list that is called Default Media. It cannot be
deleted, but you can change its parameters if you want to use it. If you choose to delete it,
the parameters will go back to its original values, but the item will still appear in the list.
7. Select the Media Tension
Océ Arizona 1200 Series
Printing on Roll Media
Chapter 7 - Roll Media Option 103