Adjusting The White Balance - Pentax OPTIO M10 Operating Manual

Adjusting the White Balance

You can take pictures in natural colors by adjusting the white balance
according to the light conditions at the time of shooting.
4
White Balance
Auto
F
G
Daylight
^ Cloudy
I
Tungsten Light
J
Fluores. Light
K
Manual
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [White Balance].
3
Press the four-way controller (5).
The White Balance screen appears.
4
Use the four-way controller (23)
to change the setting.
5
Press the 4 button.
The White Balance setting is saved.
6
Press the MENU button.
The camera returns to capture status with the current setting.
Refer to "Manual Setting" (p.79) for instructions on adjusting the white
balance manually.
Saving the White Balance 1p.86
78
MENU
2, 3, 4
5
1, 6
The camera adjusts the white balance automatically.
Use this mode when taking pictures outside in sunlight.
Use this mode when taking pictures outside on a cloudy day.
Use this mode when taking pictures under electric or other
tungsten light.
Use this mode when taking pictures under fluorescent light.
Use this mode when adjusting the white balance manually.
Rec. Mode 1/3
6
Recorded Pixels
M
Quality Level
AWB White Balance
Focusing Area
ISO
Sensitivity
AUTO
Exit Exit Exit
MENU
White Balance
Auto Auto Auto
Cancel Cancel Cancel
MENU
R C
OK OK OK
OK