Selecting The Flash Mode - Pentax OPTIO M10 Operating Manual

Selecting the Flash Mode

Flash Modes
,
Auto
Flash Off
a
Flash On
b
Auto + Red-eye
c
Flash On + Red-eye
d
• The flash will not discharge a (Flash Off) in C mode or y mode,
or when the drive mode is set to 1, or the focus mode is set to s.
• A pre-flash discharges when using the red-eye reduction function.
• In A mode, you can only select , or a.
1
Press the four-way controller (4)
in A mode.
The flash mode changes each time the
button is pressed. You can also change the
setting using the four-way controller (23).
2
Press the 4 button.
The camera returns to capture status with
the selected flash mode.
A R A X q < I i \ Q E D >
The flash discharges automatically depending on the
light conditions.
The flash will not discharge, regardless of the
brightness. Use this mode to take pictures where flash
photography is prohibited.
The flash discharges regardless of the brightness.
This mode reduces the phenomenon of red eyes
caused by the light from the flash being reflected in the
subject's eyes. The flash discharges automatically.
This mode reduces the phenomenon of red eyes
caused by the light from the flash being reflected in the
subject's eyes. The flash will discharge regardless of
the light conditions.
1
2
Flash Mode Flash Mode Flash Mode
Auto Auto Auto
OK
4
OK OK OK
73