Taking Pictures; Letting The Camera Choose The Optimal Settings (Program Mode) - Pentax OPTIO M10 Operating Manual

Taking Pictures

Taking Pictures

Letting the Camera Choose the Optimal Settings
(Program Mode)
In R (Program mode), the camera automatically sets the shutter speed
and aperture for taking still pictures. However, you can select other
functions such as the flash mode and recorded pixels.
1
Press the power switch.
The camera turns on and is ready to take still pictures.
2
Set the functions you want to use.
Refer to "Setting the Shooting Functions"
(p.71 - p.85) for details of how to set the
functions.
3
Press the shutter release button
halfway.
The focus frame on the LCD monitor turns
green if the subject is in focus.
4
Press the shutter release button fully.
The picture is taken.
If a shooting mode other than R mode has been selected, select
R mode from the Capture Mode Palette. (p.51)
Taking Still Pictures 1p.38
1
3, 4
03/25/2006 03/25/2006 03/25/2006
14:25 14:25 14:25
R
4
38 38 38
57